A handyman is a person who manages a lot of different types of work and repairs for a home or office. A handyman is capable of doing all types of repairs and installations, right from minor carpentry work to minor electrical work. A handyman, sometimes also known as a maintenance handyman, does routine maintenance on various companies or residences. Their primary responsibilities include repairing plumbing systems or installing new systems on a small scale, repairing commercial equipment or tools, and inspecting different companies or residential appliances to guarantee appropriate operation.

Since a handyman’s work is in different areas at once, it is pertinent for them to use the right types of tools in the right place. Let us know in detail why the right type of drill bit is important for handymen in this article by Marvel BMT, who are one of the leading wholesale building materials suppliers in Dubai.

Before We Begin, Let Us First See What Are the Duties and Responsibilities of a Handyman?

A handyman is often in charge of electrical, mechanical, and plumbing maintenance. Also, oftentimes, a handyman is required to do the landscape maintenance work to keep the outdoor areas in good shape. A handyman often does the following tasks:

  • Conduct electrical repairs in public places, such as lighting and washing.
  • Ensure that all the mechanical parts and equipment are in good operating order and that they are repaired as and whenever needed.
  • Finish all general cleaning and upkeep.
  • Floors, stairs, and plumbing should be installed and replaced as needed.
  • Repair and repaint doors, windows, walls, ceilings, roofs, and other building components.
  • Maintain garbage and recycling cans throughout the site.
  • Maintain and repair air conditioning and heating systems as well.

At Marvel BMT building materials shop in Dubai, you can find almost all types of tools and equipment that are required by a handyman to finish the above-mentioned tasks. To finish the above types of work, a handyman needs many different types of tools, such as a drilling machine, hole saw, hack saw, screwdrivers, spanners, and many other similar tools.

Choosing the Right Drill Bit Improves Finishing of the End Job

As we have seen above, a lot of different jobs are required to be accomplished by a handyman. Jobs such as plumbing have different materials from those of an electrical or carpentry job. In such a case, if we use common drill bits for both carpentry and electrical work, then either of the two jobs will have bad finishing.

Fine and finished holes are necessary for two main reasons: firstly, for the two pieces to join precisely; and secondly, for the accuracy of the holes. If we use a hard drill that is required for drilling in the plumbing department for carpentry work, the drilled hole would have a lot of defects in terms of waste wood. If we use a carpentry drill for plumbing work, the drill bit will break off easily and the handyman will have to do a lot of work to change the drill bits. Even major building material suppliers in Dubai suggest that a specific drill bit be used for a specific job so that the finishing quality of the drilled holes remains good and intact.

With the Right Drill Bit, Handyman Can Drill a Hole to the Desired Depth

At hardware materials suppliers in Dubai, you will find different types of drill bits such as HSS drill bits, carbide-coated drill bits, copper drill bits, titanium drill bits, and so on. For hard surfaces, hard drill bits are required for drilling holes of the desired length. Whereas for surfaces such as wood and bricks, normal drill bits are OK.

If you use hard material drill bits for drilling in brittle materials such as mud bricks or walls, then the materials will get immensely damaged. If you want to drill a 10 mm hole, you will most likely end up with either a damaged wall or brick or a large lump of the damaged part. To avoid such mishaps, it is highly recommended by industry experts and also by a leading hardware tools supplier in Dubai that you use the right type of drill bit for drilling holes on job surfaces, and for the same reason, the handyman must be equipped with the right drill bits.

The Right Type of Drill Bit Helps in Getting the Right Angle of Holes

There are various types of point angles in drill bits. However, angles of 118° and 135° have come to dominate over time. Angle 118° is recommended for usage in soft materials such as aluminum and wood. Angle 135° has a sharper point and a smaller chisel. Angle 135°, on the other hand, maybe your best pick if you’re working with strong materials like stainless steel. Angle 118° is flatter, has a higher pitch, and requires a longer chisel.

Having the correct type of drill bit for every job allows the handyman to drill holes at the desired angle and length without damaging the job. If you are in doubt about which type of drill bit is right for a particular job, then you can visit Marvel BMT, which is a leading building materials company in Dubai. Our experts will be happy to help you in every aspect.

Concluding Lines

Choosing the proper drill bits for a particular purpose may be a difficult experience even for handymen and other professionals. However, having a thorough understanding of the things to consider when selecting a drill bit may save you money, time, and energy. On the other hand, choosing top-quality equipment over ready-made drill bits on the market gives you an advantage in your decision-making process. You can buy the best quality drill bits at Marvel BMT, which is one of the oldest hardware tool traders in Dubai.